Instruction

Instructions for Mounting Glueable Vinyl Holders

1. Preparation:

  • Draw a small line where the bottom edge of your vinyl will be (use a removable pen or glue the holders above the lines).
  • Draw a second line for the second holder (15 cm apart). Ensure it's at the same height.
  • Mark the middle line for the top holder (approx. 31.5 cm higher).

2. Surface Preparation:

  • Clean the areas with a napkin, water, and dish soap.
  • Let the areas dry completely.

3. Mounting the Holders:

  • Press the bottom holders against the wall for at least 10 seconds. Ensure they are level.
  • Use a vinyl cover to position the upper holder (without adding weight).
  • Place the cover on the bottom holders, remove the glue strip, and position the upper holder along the middle line.
  • Press the upper holder against the wall for at least 10 seconds.

4. Final Steps:

  • Let the holders dry for at least 24 hours.
  • After 24 hours, hang your vinyl records and enjoy!
Questions? Leave us a message